Lexmark X860DE 3 User Manual page 54

3
Flex the sheets back and forth to loosen them, and then fan them. Do not fold or crease the paper. Straighten the
edges on a level surface.
4
Load the paper stack with the recommended print side faceup. Load the paper in either the long-edge or
short-edge orientation as shown.
Notes:
Load sizes larger than A4 in the short-edge orientation.
•
Paper must be loaded in the short-edge orientation to create booklets if the optional booklet finisher is
•
installed.
Long-edge orientation
5
Make sure the paper guides are secure against the edges of the paper.
6
Insert the tray.
7
If the paper type you loaded differs from the type that was previously loaded in the tray, then change the Paper
Type setting for the tray.
Loading paper and specialty media
54
Short-edge orientation