Bin Setup; Reports - Lexmark X850E Reference Manual

Bin Setup

This menu item is used to specify the output bin where the printed print media goes. This menu item only appears if at least
one optional output bin is installed, and only installed output bins appear as values.
Menu item Purpose
Output Bin Specifies the default bin for
printed print media.
Configure Bins Determines which output bin(s)
the MFP uses for a particular
job.
Assign Type/Bin Sends print jobs to a specific
output bin based on the
requested paper type.
Note: This menu item only
appears when Configure Bins
appears and is set to Mailbox
or Type Assignment.
If a user-defined name is
available, it appears instead of
Custom <x> Bin. If two or
more output bins share the
same name, the name only
appears once in the Assign
Type/Bin value list.

Reports

Note: After a report prints, the MFP returns to the home screen.
Reports
Values and descriptions
Standard Bin*
Bin 1
Bin 2
Mailbox*
Link
Link Optional
Type Assignment
Plain Paper Bin
Card Stock Bin
Transparency Bin
Labels Bin
Bond Bin
Envelope Bin
Letterhead Bin
Preprinted Bin
Colored Bin
Custom <x> Bin (<x>
represents 1–6)
25
If a user-defined name is available
for an output bin, then the name
appears instead.
Note: If multiple output bins are
assigned the same name, the
name only appears once in the
Output Bin value list.
Sends print jobs to the output bin
designated for that user.
Links two or more output bins
together as though they were one
large bin. When one linked output
bin is full, the MFP starts filling the
next linked bin and continues with
each additional linked bin.
Note: The Link Optional value only
appears when at least two optional
output bins are installed.
Links all optional output bins as
though they were one large bin,
while leaving the standard output
bin individually addressable.
Disabled*
Standard Bin
Bin 1
Bin 2
Note: Only installed output bins
appear. If Configure Bins is set to
Type Assignment, then the default
is the Standard Bin.