Lexmark X850E Reference Manual page 70

Menu item Purpose
Multipage Order Determines the positioning of
multiple page images when using
Multipage Print. See Multipage
Print on page 69.
The positioning depends on the
number of images and whether the
images are portrait or landscape in
orientation.
For example, if selecting 4-Up multiple page printing and portrait orientation, the results differ
depending on the Multipage Order value selected.
Horizontal
Multipage View Determines the orientation of a
multiple-page sheet.
Multipage Border Prints a border around each page
image when using Multipage Print.
Staple Job Sets stapling as the default for all
print jobs.
Note: This menu item appears
when an optional finisher is
installed.
Hole Punch Punches holes along the edge of
the paper.
Note: This menu item appears
when an optional finisher is
installed.
Hole Punch Punches holes along the edge of
Mode the paper.
Note: This menu item appears
when an optional finisher is
installed.
Vertical
Order Order
1 2 1
3 4 2
Settings
Values and descriptions
Horizontal*
Vertical
Reverse Horizontal
Reverse Vertical
Reverse
Horizontal Order
3 2
4 4
Auto*
Long Edge
Short Edge
None*
Solid
Off*
Auto
Front
Back
Dual
On
Off*
2
3*
2
4*
70
Reverse
Vertical Order
1 3 1
3 4 2
Lets the MFP choose between portrait
and landscape orientation.
Sets the long edge of the print media
as the top of the page (landscape).
See Duplex Bind on page 68 for
more information.
Sets the short edge of the print media
as the top of the page (portrait). See
Duplex Bind on page 68 for more
information.
Does not print a border around each
page image.
Prints a solid line border around each
page image.
Does not staple print jobs.
Staples each print job sent to the
printer.
Staples each print job based on
information sent from the printer driver
or application software.
Hole punches each print job sent to
the printer.
Does not hole punch print jobs.
Only appears when the 3 -hole finisher
is installed.
Only appears when the 4-hole finisher
is installed.