Kaiterra Sensedge Deployment Manual page 25

The Overall Index, however, focuses specifically on the parameters our devices

measure to determine your indoor air quality. You can also enable or disable
specific pollutants from its calculation, in case you want the air quality value
to only reflect the calculation of specific parameters, such as CO2 or
Particulate Matter.
Please note that these AQI settings are local to the device. In order to change

the AQI Standard on your dashboard, please navigate to your Dashboard
Account Settings.
For more information, please refer to our article on

Quality
Indoor vs Outdoor is a button on the "My Air" tab, which allows you to compare the air

quality readings of your Sensedge to the air quality readings in your city, which are
provided by public air quality sensors in the area.
In order to enable this feature, you must navigate to the Settings → General →

Device Location page and set your outdoor location to either "Closest", which
will locate the nearest public sensor data, or "Custom", which will allow you to
choose the city you want to compare your air quality data to.
The Settings → Time page is a simple, yet critical function of your Sensedge device,

as an inaccurate time setting can result in missing data points on both your device
and the Kaiterra Dashboard.
We highly recommend turning on the "Automatic Date & Time" feature and

setting the correct time zone as these settings will ensure the device remains
accurate and that your data points arrive at your dashboard without issue.
For a complete walkthrough of all of the Sensedge Settings, please refer to our article on
Understanding Your Sensedge
Readings.
Settings.
Understanding Your Air
Page 24