Power Considerations - Kaiterra Sensedge Deployment Manual

3.

Power Considerations

Depending on the enterprise air quality monitor you choose for your installation, you will
need to have access to varying types of power in order to properly power your device(s).
The Sensedge natively supports 100-240V AC via USB cable and adapter.
For third-party power options*, you can
use a:
DC 12V-5V USB converter

≥ 2A 5V Power over Ethernet

splitter
Other things to note:
The USB cable length is 6 feet (2

meters). This is the optimal length
for the USB cable as any longer
runs the risk of not sufficiently
powering the device.
If a third-party USB cable is used,

the cable should be rated at 2.4A
to ensure sufficient power is
carried from the power adapter to the device.
The wall plug adapter converts AC power to DC 5V at 1.8A, which is the required

amount of power for the device.
*Note: using third-party power adapters have not been regulated or tested for long term use.
Please use caution when deciding on using any type of power converter with a Kaiterra product.
Page 14