Device Setup - Kaiterra Sensedge Deployment Manual

6.

Device Setup

The Sensedge is shipped with the following components in order to complete your setup
and installation*:
1x Sensedge Air Quality Monitor

2x Standard Sensor Modules for Particulate Matter (KM-100) and TVOC (KM-103)

1x Wall-mounting "Back Shell", including Wall Screws and Wall Anchors

1x USB Charging Cable and Wall Charger with multiple plug adapters for different

countries
1x User Manual

After unboxing the device, make sure to
insert both sensor modules into their module
bays.
The sensor module bays are located

on the bottom of the device. The
sensor modules can be inserted in
either module bay.
However, we recommend placing

the KM-103 sensor module in the
right module bay for optimal performance.
The sensor modules can also be inserted while the device is turned on.

When inserting, make sure the sensor modules have their pin connectors facing

inward and the Kaiterra logo facing toward the screen.
*For a complete list of components, please refer to our Sensedge introduction video.
Page 21