Command 36: Write Primary Variable Upper Limit Value; Command 37: Write Primary Variable Lower Limit Value - Bell VFM60 Series User Introduction Manual

Byte 5-8:
Response:
Byte 0:
Byte 1-4:
Byte 5-8:
Test of command:
Send command 35: FF FF FF FF FF 82 9A 1A AD 18 8C 23 09 13 40 00 00 00 40 00 00 00 02;
Write primary variable range values
Receive command 35: FF FF FF FF FF 86 9A 1A AD 18 8C 23 0B 00 00 13 00 00 00 00 00 00 00
00 04

7.1.17 Command 36: Write primary variable upper limit value

Command formate:
Write the primary variable upper limit to current primary variable value. The change of primary
variable upper limit value has no effect on the primary variable lower limit.
Request:
NONE
Response:
NONE
Test of command:
Send command 36: FF FF FF FF FF 82 9A 1A AD 18 8C 24 00 1F; Write the primary variable
upper limit to current primary variable value.
Receive command 36: FF FF FF FF FF 86 9A 1A AD 18 8C 24 02 00 00 19

7.1.18 Command 37: Write primary variable lower limit value

Command formate:
Write the primary variable lower limit to current primary variable value. The change of primary
variable lower limit value has no effect on the primary variable higher limit.
Request:
NONE
Response:
Date:24/04/2020
Primary variable lower range limit, IEEE 754
Primary variable upper and lower range value unit code
Primary variable upper range limit, IEEE 754
Primary variable lower range limit, IEEE 754
41 / 59
VFM-60
Vortex Flowmeter
Rev1.3
User's Manual