General; Model Number And General Specification; Packing List; Storage - Bell VFM60 Series User Introduction Manual

1 General

Every VFM60 vortex flowmeter will be carefully inspected before delivered to users.
Please carefully check if there is any damage on the package and product when you received them
Please check if the package contains all the accessories according to 1.2 or your purchase order.
Please make sure the person in charge of this device has carefully read this manual and understand its
descriptions.

1.1 Model Number and General Specification

Please check if the model number and specifications on the name plate match your requirement on the
purchase order.
Please kindly record the model number and instrument ID code, which will be required if you need and
service or support from us.

1.2 Packing List

When you recived the package, please check if it contains the items as below:
VFM60 vortex flowmeter x1
User's manual x1
Calibration certificate x1
Quality certificate x1
Cable (For remote type only, length according to customer's requirement)
Counter flanges (For wafer type, or for flanged type when customer requied so)
Screws and bolt (For wafer type, or for flanged type when customer requied so)

1.3 Storage

If the product needs to be stored for a long period before use, please be awared of below:
(1) The product should be kept in the origin package and same as it was when received.
(2) Please store the product in a proper location according to the requirements below:
Not in a uncovered field.
Not in a location where could have great vibration.
Please keep the enclosure of the meter closed.
The ambient temperature, atmospheric pressure and humidity should be:
Temperature:

1.4 Hazardous Area Installation:

Our vortex flowmeter can be installed in hazardous area according to the approval below:
Exd IICT3 (NEPSI) NOT EUROPE or USA
Date:24/04/2020
-20~+60℃ ；RH： 5%~99% ；Pressure： 86~106Kpa
4 / 59
VFM-60
Vortex Flowmeter
Rev1.3
User's Manual