Wiring For Rs485; Wiring For 12-Terminal Board; Wiring For 3 Wire Pulse Output - Bell VFM60 Series User Introduction Manual

VFM-60
Vortex Flowmeter

3.1.3 Wiring for RS485

Picture 3.5 Wiring for RS485

3.2 Wiring for 12-terminal board

3.2.1 Wiring for 3 wire pulse output

3-wire pulse output require a power source of 13.5~42VDC. VFM use a current pulse output with
50% duty ratio. If the pulse reciving instrument require voltate pulse, please add a resistor between
 
' and "V-", the resistance should be within 500
'
~1000 , and power consumption should be
no less than 0.5W.
Picture 3.6: 3-wire pulse output wiring
Rev1.3
Date:24/04/2020 User's Manual
12 / 59