Can Send But Not Receive Faxes - Lexmark X5470 Fax Manual

I
S YOUR PRINTER MEMORY FULL
Change the setting to Scan after Dial.
1
From the control panel, press Fax Mode.
2
Press .
3
Press or repeatedly until Fax Setup appears.
4
Press .
5
Press or repeatedly until Dialing and Sending appears.
6
Press .
7
Press or repeatedly until Scan appears.
8
Press .
9
Press or repeatedly until After Dial appears.
10
Press .

Can send but not receive faxes

These are possible causes and solutions. Try one or more of the following:
L
OAD PAPER
Load paper to print any faxes that have been stored in the printer.
C A A
HECK THE UTO
If the Auto Answer light is on:
•
The printer will answer after the preset number of telephone rings.
•
If you are using a distinctive ring, see "Setting the distinctive ring" on page 38.
C
HECK INK
Check the ink levels, and install a new cartridge if necessary.
C F
HECK WHETHER AX
1
From the control panel, press Fax Mode.
2
Press .
3
Press or repeatedly until Fax Setup appears.
4
Press .
5
Press or repeatedly until Ringing and Answering appears.
6
Press .
7
Press or repeatedly until Fax Forward appears.
?
NSWER BUTTON
F
ORWARDING IS SELECTED
Troubleshooting
47