Loading The Standard Tray Or The Optional 250-Sheet Tray - Lexmark X422 User Reference Manual

Do not remove trays while a job prints or while Busy displays on the control panel. Doing so may
cause a jam.

Loading the standard tray or the optional 250-sheet tray

The following instructions work for loading the standard tray or the tray for the optional 250-sheet
drawer.
Your MFP has one standard 250-sheet tray. You may use the optional 250-sheet drawer or the
optional 500-sheet drawer as a print media source; however, you may use only one of these options
at a time. See your Setup Guide for installation information.
For the sizes and types of print media these trays support, see
To load the tray for the optional 500-sheet drawer, see
To load print media in a tray:
1
Remove the tray.
2
Press down on the metal plate until it locks into place.
Media specifications and guidelines
Print media specifications and guidelines
Print media source
Loading the optional 500-sheet
62
specifications.
tray.