Using And Loading The Multipurpose Feeder - Lexmark X422 User Reference Manual

Using and loading the multipurpose feeder

Your MFP has a multipurpose feeder that holds several sizes and types of print media. It is located
on the front of your MFP and can be closed when you are not using it. Reserve the multipurpose
feeder for when you print on different sizes and types of print media, such as card stock,
transparencies, postcards, note cards, and envelopes. You can load a stack of print media, or you
can load single sheets you do not keep in a tray.
If the MFP displays Load MP Feeder, you should load the multipurpose feeder. Load the print
media, and then press
load the next sheet. See
See page 51 of Media specifications and guidelines
Note: When printing from the multipurpose feeder, be sure to set the Paper Size and
Paper Type.
Follow these guidelines when using the multipurpose feeder:
• Load only one size and type of print media at a time.
• To achieve the best possible print quality, use only high-quality print media that is designed
for use in laser printers. See
print media.
• To prevent jams, do not add print media to the multipurpose feeder when it already contains
print media.
• Do not close the multipurpose feeder while a job is printing. Doing so may cause a jam.
• Load print media with the top edge going into the multipurpose feeder first.
• Do not place objects on the multipurpose feeder. Also, avoid applying excessive force to it.
Media specifications and guidelines
. If you load a single sheet, the message is displayed again to prompt you to
Loading the multipurpose feeder
Print media guidelines
Print media specifications and guidelines
for more information.
for a listing of supported types and sizes.
for information on selecting types of
72