Scanning To E-Mail Or Ftp; Build A To: List; Search For Name - Lexmark X422 User Reference Manual

The following cannot be fed by the ADF:
• Paper with clip or staple attached
• Paper with ink not totally dry
• Paper with inconsistent thickness, such as envelopes
• Paper with wrinkles, curls, folds, or tears
• Paper that is too large or too small (use the scanner flatbed instead)
• Paper with an odd (non-rectangular) shape
• Paper with perforations on its side
• Tracing paper, coated paper, carbonless paper
• Items other than papers, such as cloth, metal, or overhead projector (OHP) film
• Notched paper
• Photographic paper
• Very thin paper

Scanning to e-mail or FTP

Note: You must set up e-mail and FTP before you can use them. See
Settings
You can scan a document directly to an e-mail address or File Transfer Protocol (FTP) site. This
section describes the settings and options available. Once you have built a To: list and chosen the
settings you want, press Start to begin scanning at any time.
Note: FTP is the protocol used across a network for exchanging files.

Build a To: list

You can add multiple e-mail recipients, or one FTP destination, to the To: list.

Search for name

Press E-mail, highlight Search for name, and press the Select button
arrow buttons to enter the name you are looking for. When you have entered the name or the first
part of the name, highlight Find and then press
down arrows to highlight the name you want, and then press
Printing, copying, faxing, and scanning
for information about setting up e-mail and FTP.
Scanning to e-mail or FTP
. When the results are displayed, use the up and
.
21
E-mail/FTP
. Use and the navigation