3.11 BURNER INJECTOR REPLACEMENT
Refer to Section
3.7
3.13 RETURN THERMISTOR REPLACEMENT
1. Isolate and drain down the boiler.
2. Remove the clip from the pump housing and remove the
thermistor.
3. Disconnect the electrical lead from the thermistor.
4. Reconnect the electrical lead to the new thermistor and
reassemble, ensuring that the thermistor is fully engaged
and the clip is correctly located.
Installation and Servicing
Section 3 - Servicing
3.12 BURNER REPLACEMENT
Refer to Section
3.2 & 3.7
SCAN
for video
Refer to Section
3.2
2
2
41