Networking Faq - Lexmark S315 User Manual

Networking
Configuring 802.1X Authentication
The information you must complete is dependent on the 802.1X security mechanism you select. Some require user
names, passwords, and/or certificates. If your network contains multiple access points with different modes of
authentication, then you can select and configure more than one authentication mechanism.
1
From the Configure 802.1X Authentication dialog, type the user name and password for the authentication server.
2
Confirm the password, and then check the selected authentication mechanism.
If you have selected
EAP‑MD5, LEAP, or
MSCHAPv2
PEAP or EAP‑TTLS
EAP‑TLS
3
Click OK, and then follow the instructions on the computer screen.

Networking FAQ

What is Wi‑Fi Protected Setup?
Wi‑Fi Protected Setup (WPS) is a simple and secure configuration that allows you to establish a wireless home network
and enable network security without requiring prior knowledge of Wi‑Fi technology. It is no longer necessary to
configure the network name (SSID) and WEP key or WPA passphrase for network devices.
Note: WPS supports only networks that communicate through access points (wireless routers).
The printer supports the following methods in connecting to a wireless network:
•
Personal Identification Number (PIN)—A PIN on the printer is entered into the wireless settings of the access point.
•
Push Button Configuration (PBC)—Buttons on both the printer and the access point are pushed within a given period
of time.
Look for any of these identifier marks to check if your access point is WPS certified:
You can find these WPS logos on the side, back, or top of your access point.
For more information on accessing the wireless settings and determining the WPS capability of your access point, see
the documentation that came with the access point or contact your system support person.
Do this
Proceed to the next step.
Click Install CA Certificate, and then type the path to the CA certificate, or click Browse to
locate the certificate file.
a
Click Install Signed Certificate, and then type the path to the signed certificate, or click
Browse to locate the certificate file.
b
Click Install CA Certificate, and then type the path to the CA certificate, or click Browse
to locate the certificate file.
77