Set Backlight Brightness - TESTO Sensor LD basic Instruction Manual

Leak detector
Table of Contents

Advertisement

11.3.5 Set backlight brightness

Settings ➔ Set backlight
Remark:
At the first touch, the
operation is possible.
Important:
If the
Backlight dimming after
on, in the currently set brightness.
Testo Sensor LD basic V1.00 EN
15
Backlight
in our example is reset to 39%, after that a "normal" function
button is not activated, then the
Here you adjust the desired
(15-100%) of the display directly.
E.g.
Backlight
to 39 %
With the help of the
Backlight dimming after
button, after a definable time interval (here
after 15 minutes), the
reduced to the minimum.
As soon as the dimmed screen is operated
again, the
Backlight
is committed
automatically on the last set value before
dimming.
To reduce the energy consumption (device
runtime), you can switch off the display
backlight by setting "Backlight off after".
Backlight
Operation
Backlight
Backlight
can be
stays permanently
Seite 16 von 22

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Sensor LD basic and is the answer not in the manual?

Subscribe to Our Youtube Channel

Table of Contents