Input Setup - Lexicon RV-5 User Manual

Lexicon rv-5: user guide
Hide thumbs Also See for RV-5:
Table of Contents

Advertisement

Setup

INPUT SETUP

Selecting the SETUP menu INPUT SETUP option opens the INPUT SETUP menu, a two-screen menu which sets up the input type and name, the
digital and analog inputs for both audio and video, the listening mode, and other advanced input settings.
MAIN MENU
SETUP
AUDIO CONTROLS
DISPLAY SETUP
VIDEO CONTROLS
SPEAKER/EQ SETUP
SETUP

INPUT SETUP

SURROUND CONFIG
DOLBY CONFIG
MUTE LEVELS
POWER ON SETTINGS
INPUT
INPUT
SETUP
INPUT SETUP
Selects between the twelve different inputs available. The input
selected in this parameter identifies the input that is currently being
setup or modified. Inputs can be scrolled through and modified
without leaving the input setup menu. However, most input setup
changes do not take affect until after the OSD menu is exited.
Note: Selecting a different input in the input setup menu will also change
the front panel input selection to match. For example, if the Tuner is
selected on the front panel and you change the Input parameter to HD,
the front panel HD input is also selected.
Most of the inputs are interchangeable, with the exception of the
Dock, PC, and Tuner inputs. These three inputs are "hard-wired" and
do not allow for user selection of the Audio In parameters. For more
3-14
INPUT SETUP 2
INPUT SETUP 1
MODE FAMILY: STEREO
INPUT: HD
NAME: ________
MODE: 2-CHANNEL
DEFAULT SUR: USE LAST
VIDEO IN: HDMI 1
A/D SAMPLE RATE: 48kHz
V-PROCESS: FAROUDJA
VIDEO OUT: AUTO
A/V SYNC DELAY: 0 ms
DIG AUDIO: HDMI 1
ADVANCED VIDEO
TRIGGER 2: ON
ANLG AUDIO: NONE
DIG/ANLG AUTO: ON
ZONE-2 OUT: ANALOG
information on these three inputs, refer to Section 5: Tuner, PC, &
Dock Controls.
Note: When a source is active, changing some audio or video parameters
may cause the Main Zone audio to briefly mute the incoming source. If
Zone 2 is set to DOWN MIX, the Zone 2 audio will also briefly mute.
NAME
SETUP
Allows the user to customize the name of the selected input. Custom
input names can include up to eight characters.
Note: A custom name cannot be assigned to the Tuner input.
ADVANCED VIDEO 1
INPUT TYPE: VCR
SHARPNESS: 32
NOISE REDUCTION: ON
X-COLOR SUPPRESS: ON
DCDi INTERPOL: ON
FILM DETECTION: ON
FILM EDIT DETECT: ON
NAME
INPUT SETUP
Lexicon
ADVANCED VIDEO 2
FLESHTONE NR: ON
COMPNT ENHANCE: ON
BRIGHTNESS: 100
CONTRAST: 100
COLOR: 100

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents