Manual Speaker Setup - Lexicon RV-5 User Manual

RV-5

MANUAL SPEAKER SETUP

Selecting the SETUP menu SPEAKER/EQ SETUP menu MANUAL option opens the MANUAL menu, which is used to manually set the speaker
distances, cross-over points, and output levels.
SETUP SPEAKER/EQ SETUP
AUTO SETTINGS
SPEAKER/EQ SETUP
SETUP
Loads the values from the active preset into the speaker cross-over
points, distances, or output level parameters. The Speakers
(cross-over points), Speaker Distances, and Output Levels menus all
have an Auto Settings parameter. All three are the same parameter,
but each affects the individual sub-menus separately and
independently of each other.
MANUAL
SPEAKERS
SPEAKER DISTANCES
OUTPUT LEVELS
OFF, ON
MANUAL AUTO SETTINGS
SPEAKER DISTANCES 1
SPEAKER DISTANCES 2
AUTO SETTINGS: OFF SIDE LEFT: 0.0ft
UNITS: FEET
SUBWOOFERS: 0.0 ft
FRONT LEFT: 0.0 ft
CENTER: 0.0 ft
FRONT RIGHT: 0.0 ft
SIDE RIGHT: 0.0 ft
REAR RIGHT: 0.0 ft
REAR LEFT: 0.0 ft
OUTPUT LEVELS 1
OUTPUT LEVELS 2
AUTO SETTINGS: OFF
REAR LEFT: 0dB
INPUT: ALL
SIDE LEFT: 0dB
TEST TONE: AUTO
SUBWOOFER1: 0dB
SUBWOOFER2: 0dB
FRONT LEFT: 0dB
CENTER: 0dB
FRONT RIGHT: 0dB
SIDE RIGHT: 0dB
REAR RIGHT: 0dB
If the Auto Settings parameter is set to ON, the parameters in that
menu cannot be manually changed until the Auto Settings
parameter is set to OFF.
Note: Any manual settings will be lost if the active preset settings are
loaded; if Auto Settings is set to ON in the Speakers, Speaker Distances, or
Output Levels menus, then previous parameter values will be overwritten.
Setup
SPEAKERS
AUTO SETTINGS: OFF
FRONT L/R: 80Hz
CENTER: 80Hz
SIDE L/R: 80Hz
REAR/Z2 L/R: 80Hz
SUB/LFE LPF: 80Hz
SUBWOOFERS: 1
SUB HPF: 20Hz
SUB MODE: NORMAL
3-9