Installation; Respect For The Environment; Instructions For Installation - ILVE KHVI90TC Installation And User Instructions Manual

Table of Contents

Installation

Packaging material is ecological and can be recycled�

The appliance contains noble metals� Current regulations apply to recycling�

When the time comes to scrap your appliance, you should utilize the various options for disposal provided by

your dealer and/or by your local authorities; remember that prior to scrapping the appliance you should make

sure that it is not useable�

Installation should be performed only by qualified personnel. The technician should be aware of current regu-

lations�

The gasket provided with the hob will prevent liquids from leaking between the hob and the cabinet� Carefully

apply the gasket 2 mm from the edge of the glass�

The dimensions of the inset area are 870 x 480 mm

The gasket provided with the hob is sufficient to cover the perimeter of the inset area. Its glue resists to a tem-

perature of 100 °C� The hob is in class "Y"� It is advisable to leave the adjacent walls free when installing the

hob� Nonetheless, placing a single side wall and a back wall is allowed� The walls should be kept at a minimum

distance of 40 mm� The inset surface, if subject to any water leaks, should be protected primarily along the

border of the inset perimeter with paint� Do not install the hob above a static oven or above a dishwasher� Make

sure that the there is at least 25 mm space underneath the hob to facilitate proper ventilation� Make sure that

there is at least 7 mm between the working zone and the upper border of any drawers or ovens to guarantee

that air is not trapped within. Do not place any inflammable objects inside the draw located under the hob. The

distance between the hob and the cooker hood must comply with the indications provided by the maker of the

cooker hood� Should indications not be provided, comply with the minimum distance of 760 mm� Once installed,

the connecting cable should not be subject to stress or tension� Installation of the hob in mobile environments

(such as boats) should only be performed by specialized personnel.

Built-in scheme

MIN. 40 mm

Table of Contents