Table of Contents
Advertisement
Control description
Pause
The pause function can be used when at least one cooking area is on�
Turn on the cooking areas and bring them to the desired power level� To set the pause function touch the "pau-
se" button� The "II" symbol appears on all the cooking areas' displays� With the pause function on, all the areas
will turn themselves off and all timer settings including the courtesy timer will be blocked� The pause function
has a maximum duration of 10 minutes; once the maximum time has elapsed the function shuts itself off� The
ON/OFF command remains active even with the pause function on� To disable the pause function press the "pau-
se" button anew and run the finger along the centre back area's slider within 10 seconds. Sliding will start the
cooking areas up again, with the previous setting (if this does not happen within 10 seconds the pause function
remains on).
Recall function
After having turned the hob off it is possible to turn it back on with its initial settings by using the ON/OFF but-
ton again within 6 seconds and subsequently touching the "pause" (flashing) button. The recall function can be
turned back on even if the "key block" or "child safety" functions have been set�
Heating to 42°c, 70°c, 95°c function
The heating function is used to keep cooked foods hot. Each area has a dedicated button ("heating function").
By touching the specific button the "u" icon appears on the "cooking area display", the "heating function level
1" display lights up and the temperature on the inside of the pan's base does not exceed 42 °C � It is possible
to select 3 temperature levels (42°C, 70°C, 95 °C) which can be seen on the specific "heating function level "
display� If the "heating function" command is touched when at level 3 the interested area turns itself off� The
function can also be turned off by using the cooking area's slider�
Pan presence recognition
Pan detection ensures proper working� The induction hob does not work if:
- The pan does not rest on the turned on cooking area, the pan is not suited to an induction system� In these
cases, the U symbol appears on the display�
- If the pan is removed during cooking, the U symbol appears on the display� If the pan is then returned to the
same cooking area, the hob continues working at the same preset power�
Residual heat indication
After turning off the cooking areas or the entire hob, if the cooking area is still hot the display shows a static "H"
symbol. Take care not to touch the cooking area and not to put inflammable objects on it.
Key blocking/unblocking
Touch the "key" button for 2 seconds to block the keys (the ON/OFF button is not blocked). Blocking is signalled
by warning light (situated over the key button). Touch the "key" button again for 2 seconds to unblock the keys.
Power management
In case the booster function is used, power management happens in the following way: the more recent power
setting has priority over the other areas� In order not to exceed the maximum useful power, the electronics
automatically reduces the power in the other areas taking them down to a lower level� During this stage the
"cooking area display" flashes for 3 seconds and then stops on the power level managed by the electronics.
GB
13
Advertisement
Table of Contents
