Agilent Technologies ESA-E Series User Manual page 20

Menu Maps and Key Descriptions
Cable Fault Location
Used to set the video bandwidth used for the measurement and
Video BW
to define whether it is automatic or manual. The default values
are 3 MHz and Auto.
TG Amplitude Used to set the power level of the internal source. The default
output level is –10 dBm.
Changes the frequency span used when acquiring the trace data
Span
prior to the FFT. This, in conjunction with Trace Points and
Velocity Factor, has a direct effect on the maximum distance
that can be measured and the subsequent span resolution. Span
is provided for use in conjunction with
FREQUENCY,
restricted bandpass characteristics.
14
when measuring DUTs that have limited or
, under
Center Freq
Chapter 2