Evm Connectors And Test Points; Table 3-1. Factory Jumper Settings - Texas Instruments BQ25180 User Manual

www.ti.com

3 EVM Connectors and Test Points

Table 3-1 shows the default configuration for connectors.
Jumper Name
Connecting the J7 jumper will enable the VIO LED. This LED will draw 10mA.
SLUUCH5B – AUGUST 2021 – REVISED FEBRUARY 2022
Submit Document Feedback

Table 3-1. Factory Jumper Settings

Description
J1
J2 VIN and GND connector
J3 VBAT and GND connector
J4 Battery Pack Connector
J5 TS Potentiometer Connector
J6 USB2ANY Connector
J7 VIO Connector to 3p3V.
J8, J9 Board connector to other
J10 /INT connector to 3p3V
J11 VSYS and GND connector
J14 Micro USB connector (optional for
Copyright © 2022 Texas Instruments Incorporated
I2C Pullup
modules
Connect 3p3V to /INT
VIN)
Note
EVM Connectors and Test Points
Setting
NA
NA
NA
NA
Connected
NA
NA
NA
NA
NA
BQ25180 EVM User's Guide 5