Dacor DTI36M977BB User Manual page 57

To remove stubborn impurities
To remove metal marks and scratches
• Use caution not to slide cookware across your cooktop. It will leave marks on the
cooktop surface. You can remove these marks by applying ceramic cooktop cleaner and
using a cleaning pad for ceramic cooktops.
• If cookware with a thin overlay of aluminum or copper boil dry, the overlay may leave
black discolorations on the cooktop. Remove the discolorations immediately, or they
may become permanent.
CAUTION
Carefully check the bottoms of cookware for roughness that may scratch the cooktop.
NZ9500K_MOD_DTI36M977BB_DG68-00899A-02_EN+MES+CFR.indb 57
1. Allow the cooktop to cool down.
2. Use a single-edge razor-blade scraper
at approximately a 45° angle against
the glass surface and scrape the
impurities. You must apply pressure to
remove the residue.
3. After scraping with the razor scraper,
apply a few drops of ceramic cooktop
cleaner on the entire area. Use a
cleaning pad to remove any remaining
residue. Do not scrape the seal around
the edges of the cooktop.
4. For additional protection, use a paper
towel with a ceramic cooktop cleaner to
polish the entire surface.
English 57
2017-08-01 12:01:24