Dacor DTI36M977BB User Manual page 53

Flex Zone
Cooking Zone 1
Cooking Zone 2
Cooking Zone 3
Cooking Zone 4
Cooking Zone
1
2
3
4
NOTE
• When using only one cooking zone, the bottom diameter of the cookware must be less
than 14 cm.
• The cooktop may take 5 - 10 seconds to recognize the position of the cookware.
• Noises may occur while the cooktop recognizes the cookware.
• Do not remove cookware during cooking. For safety reasons, the cooktop automatically
stops operation 5 seconds after the cookware is removed.
NZ9500K_MOD_DTI36M977BB_DG68-00899A-02_EN+MES+CFR.indb 53
1 burner 2 burner
• The Flex Zone is a large cooking area
located on the side of the cooktop (see
the figure on the left) that is specially
designed to accommodate multiple
cookware of different shapes and sizes at
once.
• The Flex Zone has four zones that
are operated by individual inductors,
allowing you to cook regardless of where
cookware is placed on a cooking zone.
• With Flex Zone, you can use a
combination of different cooking zones
to enlarge the cooking area. See the
table below for details about different
combinations.
3 burner 4 burner
English 53
2017-08-01 12:01:24