Advertisement
SmartKey Re-Keying
Re-key the lock to work with your
existing key. See the supplied
SmartKey Re-key instructions for more
information.
Note: If Auto-Lock is enabled, remove
the batteries before re-keying your lock.
System Alerts
Operation
Flashes GREEN x2
Unlock
Flashes AMBER x2
Lock
Flashes GREEN x1
Factory
Reset
Flashes GREEN x1
Programming
18
Lights
Sounds
2 beeps
Flashes RED x10
10 beeps
Flashes RED x 3
3 beeps
Flashes RED x15
15 beeps
2 beeps
Flashes RED x10
10 beeps
Alternate RED/
5 beeps
WHITE Flash x5
1 beep
Flashes RED x3
3 beeps
1 beep
Flashes RED x3
3 beeps
Explanation
Successful unlock
Low battery
Incorrect User Code
Exceed 3 incorrect
User Code attempts
Successful lock
Low battery
Stuck/Jammed bolt
Successful
Unsuccessful
Successful
Unsuccessful
Troubleshoot
Install fresh new batteries
Check code, and retry
Wait 1 minute, check code,
and retry
Install fresh new batteries
Clear jam and try again
Retry factory reset steps.
Make sure to press the
Programming Button one
more time within 10 seconds
after the long beep.
Review Programming steps
Advertisement
Need help?
Do you have a question about the SMARTCODE and is the answer not in the manual?
Questions and answers
How many digits can be used to program? 4 or 6 or more
You can program the Kwikset SmartCode lock to have 4 to 8 digits.
This answer is automatically generated
how to enable the auto lock
To enable the auto lock feature on a Kwikset SmartCode lock, follow these steps:
1. Remove the Cover: Unscrew and remove the battery cover from the interior side of the lock.
2. Locate the Auto Lock Switch: Find the small switch or button labeled for auto lock inside the battery compartment.
3. Enable Auto Lock: Move the switch to the "on" position or follow the specific button sequence mentioned in the lock’s manual.
4. Replace the Cover: Secure the battery cover back in place.
5. Test the Feature: Lock and unlock the door to ensure the auto lock function is working.
This setting will automatically lock the door after a short delay when it is left unlocked.
This answer is automatically generated
We can’t program the code