Advertisement
SmartCode™ at a Glance
Exterior
1
2
3
1. Number Buttons
Used to enter User Codes. Each code must
be 4 to 8 digits in length.
2. Checkmark
Used for programming.
3. SmartKey Cylinder
Rekeyable cylinder retracts and extends the
latch bolt by key from the exterior.
4. Lock Button
Used for programming, clearing User Code
entry errors, lighting up the keypad and
locking the door.
5
4
6
7
5. Battery Holder
6. Programming Button
7. Turnpiece
8. Battery Cover
Interior
Uses 4 AA Alkaline batteries, 1.5V
Used for programming functions.
Lock and unlock from the interior.
Push it upward and outward to replace
the batteries.
8
17
Advertisement
Need help?
Do you have a question about the SMARTCODE and is the answer not in the manual?
Questions and answers
How many digits can be used to program? 4 or 6 or more
You can program the Kwikset SmartCode lock to have 4 to 8 digits.
This answer is automatically generated
how to enable the auto lock
To enable the auto lock feature on a Kwikset SmartCode lock, follow these steps:
1. Remove the Cover: Unscrew and remove the battery cover from the interior side of the lock.
2. Locate the Auto Lock Switch: Find the small switch or button labeled for auto lock inside the battery compartment.
3. Enable Auto Lock: Move the switch to the "on" position or follow the specific button sequence mentioned in the lock’s manual.
4. Replace the Cover: Secure the battery cover back in place.
5. Test the Feature: Lock and unlock the door to ensure the auto lock function is working.
This setting will automatically lock the door after a short delay when it is left unlocked.
This answer is automatically generated
We can’t program the code