Advertisement
Before you can lock or unlock the door a User Code must be created.
Refer to page 19 for instructions on how to create a User Code.
Locking
To lock your door, press the Lock
button. The lock will beep and the
keypad will flash amber as the bolt
extends.
16
Unlocking
To unlock your door, enter the User
Code. The lock will beep and the
keypad will flash green and beep
twice as the bolt retracts.
Advertisement
Need help?
Do you have a question about the SMARTCODE and is the answer not in the manual?
Questions and answers
How many digits can be used to program? 4 or 6 or more
You can program the Kwikset SmartCode lock to have 4 to 8 digits.
This answer is automatically generated
how to enable the auto lock
To enable the auto lock feature on a Kwikset SmartCode lock, follow these steps:
1. Remove the Cover: Unscrew and remove the battery cover from the interior side of the lock.
2. Locate the Auto Lock Switch: Find the small switch or button labeled for auto lock inside the battery compartment.
3. Enable Auto Lock: Move the switch to the "on" position or follow the specific button sequence mentioned in the lock’s manual.
4. Replace the Cover: Secure the battery cover back in place.
5. Test the Feature: Lock and unlock the door to ensure the auto lock function is working.
This setting will automatically lock the door after a short delay when it is left unlocked.
This answer is automatically generated
We can’t program the code