Cisco 7920 Phone Manual page 3

Make a Conference Call
During a call, press Confrn to put the first
party on hold. (Press or
Confrn if not visible.) Dial the number for the
second party. After the second party answers,
press Confrn again to complete the action.
To add another party, press Confrn and
repeat the steps.
Forward Your Calls to Another Number
Locate CFwdAll and press it. Dial the number
to which you want to forward all calls.
"Forwarded to <number>" displays.
Cancel forwarding by pressing CFwdAll.
Copyright © 2005 Cisco Systems, Inc. All rights
reserved. Cisco, Cisco IOS, Cisco Systems, and the Cisco
Systems logo are registered trademarks of Cisco Systems,
Inc. or its affiliates in the United States and certain other
countries. All other brands, names, or trademarks
mentioned in this document or Website are the property
of their respective owners. The use of the word partner
does not imply a partnership relationship between Cisco
and any other company. (0502R)
Printed in China PRC
to locate
Cisco Wireless
IP Phone 7920
Cisco CallManager Release 4.0 and Later
Using the Phone
Power on the phone—Press
and hold until phone powers on.
Dial a number—Press numbers on the keypad
and then press
Answer a call—Press
Hang up a call—Press
Power off the phone—Press and hold
78-16888-01
DOC-7816888=
until phone powers off.
Quick Reference
(red key)
. (There is no dial tone).
(green key).
(red key).
Basic Phone Features
Access phone features—Press
(softkey) that corresponds to the feature. Use
or to see other features during a call.
Access Menu options—Press
and use or to switch to the desired
menu option.
Put a call on Hold—Press Hold. Press
Resume to reconnect to the call.
Answer another incoming call—Press Hold
for current call. Press to select the second
call and press to answer the call.
Transfer a call—Press Trnsfer. Dial the
number to which you want to transfer the
call. After the party answers or the phone
rings, press Trnsfer, then hang up.
Reconnect to a call—If your call fails to
transfer or you want to reconnect to a held
call, press Resume.
Move a shared line call between desk phone
and wireless phone—From your phone with
the active call, press Hold. From your other
phone, press Resume to connect to the call.
Mute the microphone—Press MuteOn. To
turn the microphone on, press MuteOff.
or
(Menu)