Setting Passwords - Cisco 7920 Phone Manual

Menu
Phone Settings
Network Config

Setting Passwords

When powering on your phone for the first time, you
might need to set your username and password to
access the wireless network. Your system
administrator can provide this information.
Follow these steps to set your username and
password.
Setting the Username and Password
1. Press Menu, then press
Profiles menu, and press Select.
2. Scroll to Network Profile and press Select.
3. Scroll to the current profile name (with
press Select.
4. Scroll to 802.11b Configuration and press Select.
5. Scroll to LEAP and press Select.
6. Scroll to Username or Password and press Select.
Cisco Wireless IP Phone 7920 for Cisco CallManager
Overview of the Cisco Wireless IP Phone 7920
Section in Phone Guide
Customizing Phone Settings
and Viewing Phone Status,
page 79.
Viewing the Network
Configuration, page 85
until you see the
) and
23