THORLABS KBD101 User Manual page 76

Appendix D
SetDCMotorOutputParams
SetDCTrackSettleParams
SetDCProfileModeParams
SetDCJoystickParams
SetDCSettledCurrentLoopParams
SetDCTriggerParams
SetDispMode
SetHomeParams
SetJogMode
SetJogStepSize
SetJogVelParams
SetPositionOffset
SetRelMoveDist
SetStageAxisInfo
SetVelParams
ShowSettingsDlg
StartCtrl
StopCtrl
StopImmediate
StopProfiled
Properties
APTHelp
DisplayMode
HWSerialNum
76
Sets the limits that are applied to the motor drive
signal
Sets the parameters for the Track and Settle
windows
Sets the parameters for the profile mode
Sets the values for the joystick max velocity and
acceleration
Sets the Current servo loop PID parameter settings
applied when the unit is 'settled'.
Sets the Trigger Mode parameters.
Sets the GUI display mode.
Sets the homing sequence parameters.
Sets the jogging button operating modes.
Sets the jogging step size.
Sets the jogging velocity profile parameters.
Sets the motor position offset.
Sets the relative move distance.
Sets the stage axis parameters.
Sets the velocity profile parameters.
Display the GUI Settings panel.
Starts the ActiveX Control (starts communication
with controller)
Stops the ActiveX Control (stops communication
with controller)
Stops a motor move immediately.
Stops a motor move in a profiled (decelleration)
manner.
Specifies the help file that will be accessed when the
user presses the F1 key. If APTHelp is set to 'True',
the main server helpfile MG17Base will be launched.
Allows the display mode of the virtual display panel
to be set/read.
specifies the serial number of the hardware unit to
be associated with an ActiveX control instance.
HA0364T Rev C Aug 2022