THORLABS KBD101 User Manual page 45

5) In the 'Control Unit' field, select '1 Ch Brushless Drive K-Cube (KBD101)'.
6) Enter a 6 digit serial number.
7) Click the 'Add' button.
8) Repeat items (1) to (7) to build the required system. (A unit can be removed from
the configuration by selecting it in the 'Loaded Configuration Details' window and
clicking the 'Remove' button or by right clicking it and selecting the 'Remove'
option from the pop up window).
9) Enter a name into the 'Configuration Names' field.
10) Click 'Save'.
11) Click 'Set As Current' to use the configuration.
Brushless DC Servo Driver K-Cube
45