Microgate Racetime 2 User Manual page 8

Racetime 2 - OptoJump Program
A: Aver.: all values
B: Keyb. beep: On
C: Accu. charge
A B
F1 F2
4.3
F1 : Averages : all values/minimum and maximum excluded
– If 'all values' is chosen, the average values of the
measurements acquired (flight times, contact times, etc.) are
calculated on the basis of all the values acquired during the
C menu
single test.
If on the other hand 'excl. min/max' is chosen, the values for
the jumps in which the minimum and maximum flight time
F3 F4
has been measured will be excluded.
Note: the exclusion of the minimum and maximum values
occurs only if at least two jumps with flight and contact times
different from zero exist, i.e. if at least two jumps starting
from inside the measurement base have been made or three
jumps if the jumps are made outside the measurement base.
To modify your choice, press F1 repeatedly.
F2 : Key beep : on/off. Select 'off' to deactivate beep
emission when the keys are pressed.
To modify your choice, press F2 repeatedly.
To return to the first screen display of the main menu, press
F4.
User manual 8