Tests Performed - Microgate Racetime 2 User Manual

Racetime 2 - OptoJump Program
A:Preconfig. Tests
B:Jump test Njump
C:Jump test time
A B
F1 F2
Athlete 0
Test N. 0
(0=all)
OK Edit
F1 F2
N 1 T 3
Power=23.87 W/Kg
Work= 7.13 Cal/Kg
esc print values
F1 F2

6 Tests performed

Select this option to display, print or delete afterwards tests
previously performed.
Press CE to return to the main menu.
CE
Attention: if Racetime 2 finds no tests memorized, the
←←
message 'Not found' appears and it is not possible to enter the
M
Tests performed mode.
C more
First choose the type of test you wish to view. The choices
possible are obviously the same as those already listed in
F3 F4
chapter 5 (New tests). An 'M' (Memory) on the third line of
the display reminds us that we are in 'Display tests
performed' mode.
6.1
After selecting the type of test, set the athlete and the number
of test you wish to view. The number 0 (zero) enables you to
call up all the tests, For example, if you set 0 as the athlete's
number and 1 as the test number, the N.1 tests of all the
menu
athletes memorized will be displayed.
To modify the athlete's code and/or test number, press F2
F3 F4
(Edit)
To confirm the settings, press F1 (OK).
6.2
At this point you will see displayed the power and work
JtiE 10j
values (for the Jumptest jumps and Jumptest time tests, only
power for acoustic reaction tests), or average length for the
WalkJump or RollJump tests.
→
In the upper part of the display the athlete's number and the
test number continue to be displayed, together with the type of
test, according to the following code:
F3 F4
JnbE# # #b– JumpTest N.jumps, external start, # # #=n. jumps
JnbI# # #b – JumpTest N.jumps, internal start, # # #=n. jumps
JteE# # #s – JumpTest time, external start, # # #=test duration
JteI# # #s – JumpTest time, external start, # # #=test duration
Walk
Roll # #. # - RollJump, # #. # = speed of mobile running board
Press ↓ or ↑ to call up the other tests which correspond to the
athlete's number and test number previously set.
Press F1 (esc) to return to the selection menu for the tests
performed.
User manual
- WalkJump
20