Microgate Racetime 2 User Manual page 13

Racetime 2 - OptoJump Program
Jump N. 1
Tc 0589 Tf 0649ms
Hei 51.7cm Rh
esc clear
F1 F2
N 1 T 3
Tcm 0469 Tfm0487ms
Heim30.4cm Rhm 62j/m
T=9.570
F1 F2
5.6
Press F3 (values) to pass to the screen display of the single
jumps; press keys ↓ and ↑ to view the next or previous jump
48j/m
respectively. F2 (clear) eliminates the jump displayed.
(Attention: it is not possible to annul elimination). F1 (esc)
returns you to the display of average values.
F3 F4
5.7
By pressing F4 (→) you enter a second screen display in
JtiE 10j
which you can see the average values for contact time, flight
time, height and rhythm, as well as the real duration of the test
(calculated from the first departure from the ground until the
→
clear
last contact with it if the start is from outside the measurement
area; if on the other hand the start takes place from inside the
measurement area, the first departure from the ground is taken
F3 F4
as the moment of the start).
From this screen display, it is possible to completely eliminate
the test performed by pressing F3. (Attention: it is not
possible to annul elimination).
Press F4 again to return to the previous screen display.
User manual 13