Microgate Racetime 2 User Manual page 14

Racetime 2 - OptoJump Program
Start : extern
Length (s) : 10
F1 F2
5.8
F3 – Jump test time
Select this mode to carry out tests of pre-established duration.
After selecting the test, choose the start mode (i.e. the
athlete's position at the start of the test) with the keys F1 (test
start from inside the measurement area) or F2 (test start from
outside the measurement area).
Press F4 (OK) to confirm your choice.
Insert the duration of the test, in seconds.
Racetime 2 will then display the athlete's code and the test.
For performance of the test and the data displayed, refer to the
previous paragraph (Jump test number of jumps).
F3 F4
During the display of average values (at the end of the test),
the code will be shown as follows:
JtE=Jumptest time, external start
JteI=Jumptest time, internal start
User manual 14