BMW X2 2021 Owner's Manual page 267

Remove cover, arrow 2.
3. Loosen both nuts, arrow 1, of the outer tail
light. Use the handle of the screwdriver from
the onboard vehicle tool kit to loosen.
Carefully pull out the tail light from the body
toward the front, arrow 2. Ensure that the wir‐
ing is not damaged.
4. Pull the connector out of the bulb holder and
have the tail light wiring hang outside.
Replacing the bulbs
1. Turn the bulb holder counterclockwise and
remove.
2. Press the nonworking bulb gently into the
socket, turn counterclockwise and remove.
Replacing components
Online Edition for Part no. 01405A2CF16 - II/21
3. Proceed in the reverse order to insert the
new bulb and attach the bulb holder.
Installing the tail light
1. Connect the plug and mount the wiring on
the tail light, arrow 1.
2. Place the tail light with the tabs, arrows 2, on
the anchors of the body and push onto both
of the threaded bolts.
3. Press on the tail lights until flush and tighten
both of the nuts.
4. Mount the cover. Make sure that the plastic
tabs of the cover are correctly seated in the
corresponding recesses of the body.
Lights in the tailgate
General
Follow the safety information, refer to page 265.
Reversing light: 21-watt bulb, P21WLL
Inner brake light: 21-watt bulb, P21WLL
Accessing the lights
1. Open the tailgate.
MOBILITY
267