BMW X2 2021 Owner's Manual page 196

CONTROLS
Intensity
With the AUTO program switched on, the inten‐
sity can be adjusted. This changes the automatic
control for the air mass.
Press the left or right side of the button:
to decrease or increase intensity.
The selected intensity is shown on the display of
the automatic climate control.
Automatic recirculated-air control/
recirculated-air mode
Concept
The automatic recirculated-air control recognizes
pollutants in the outside air. The outside air sup‐
ply is shut off and the interior air is recirculated.
General information
If the system is activated, a sensor detects pollu‐
tants in the outside air and controls the shut-off
automatically.
If the system is deactivated, outside air continu‐
ously flows into the car's interior.
With constant air recirculation mode, the air qual‐
ity in the car's interior deteriorates and window
fogging increases.
Switching on/off
Press button repeatedly to select an op‐
erating mode:
▷ LEDs off: outside air flows in continuously.
▷ Left LED on, automatic recirculated-air con‐
trol: a sensor detects pollutants in the outside
air and shuts off automatically.
▷ Right LED on, recirculated-air mode: the sup‐
ply of outside air into the vehicle is perma‐
nently blocked.
Recirculated-air mode switches off automatically
at low outside temperatures after a certain
amount of time in order to avoid window fogging.
196
Climate control
Online Edition for Part no. 01405A2CF16 - II/21
If the windows are fogged over, switch off the re‐
circulated-air mode and press the AUTO button
to utilize the condensation sensor. Make sure
that air can flow to the windshield.
Air flow, manual
Concept
The air flow for climate control can be adjusted
manually.
General information
To adjust the air flow manually switch off AUTO
program first.
Adjusting
Press the left or right side of the button:
to decrease or increase air flow.
The selected air flow is shown on the display of
the automatic climate control.
The air flow may be reduced automatically to
save battery power.
Manual air distribution
Concept
The air distribution for climate control can be ad‐
justed manually.
Adjusting
Press the button repeatedly to select a
program:
▷ Upper body region and floor area.
▷ Floor area.
▷ Windows and floor area.
▷ Windows.
▷ Windows and upper body region.
▷ Upper body region.
▷ Windows, upper body region, and floor area.
If the windows are fogged over, press the AUTO
button to utilize the condensation sensor.