BMW X2 2021 Owner's Manual page 106

CONTROLS
Via iDrive:
1. "My Vehicle"
2. "Vehicle settings"
3. "Lighting"
4. "Exterior lighting"
5. "One-touch turn signal"
6. Select the desired setting.
Settings are stored for the profile currently used.
Signaling briefly
Press the lever to the resistance point and hold it
there for as long as you want the turn signal to
flash.
Malfunction
Unusually rapid flashing of the indicator light indi‐
cates that a turn signal bulb has failed.
High beams, headlight flasher
Press the lever forward or pull it backward.
▷ High beams on, arrow 1.
The high beams light up when the low beams
are switched on.
▷ High beams off/headlight flasher, arrow 2.
106
Driving
Online Edition for Part no. 01405A2CF16 - II/21
Wiper system
General information
Do not use the wipers if the windshield is dry, as
this may damage the wiper blades or cause them
to become worn more quickly.
Safety information
Warning
If the wipers start moving in the folded away
state, body parts can be jammed or damage
may occur to parts of the vehicle. There is a risk
of injury or risk of damage to property. Make
sure that the vehicle is switched off when the
wipers are in the folded away state and the wip‐
ers are folded in when switching on.
NOTICE
If the wipers are frozen to the windshield, the
wiper blades can be torn off and the wiper mo‐
tor can overheat when switching on. There is a
risk of damage to property, among other poten‐
tial damage. Defrost the windshield prior to
switching the wipers on.
Switching on
Press the lever up until the desired position is
reached.
▷ Resting position of the wipers, position 0.