BMW X2 2021 Owner's Manual page 208

CONTROLS
cable connection to the vehicle in the car's in‐
terior.
General information
The cargo cover can be removed in order to load
bulky luggage.
Removing
1. Detach the retaining straps at the tailgate.
2. Pry cover up a bit, arrow 1, and pull out of the
brackets toward the back, arrow 2.
Installing
Proceed in the reverse order to reinstall. The
cargo cover must engage audibly into place on
its holders.
Variable cargo floor panel
Concept
With the variable cargo area floor, the cargo area
can be configured corresponding to transport re‐
quirements.
General information
Follow the information on securing the cargo, re‐
fer to page 221.
208
Interior equipment
Online Edition for Part no. 01405A2CF16 - II/21
Removing the cargo floor panel
1. Fold the rear part of the cargo floor panel for‐
ward.
2. Grasp the cargo floor panel in the rear and
fold up above the locking point of the upper
position, refer to page 208.
3. Pull the cargo floor panel backward from the
brackets.
Inserting the cargo floor panel
1. Push the cargo area floor into the supports at
a shallow angle. The cargo area floor must
engage noticeably.
2. Fold the cargo area floor over downward.
Folded up position
Safety information
Warning
Improper use of the variable cargo floor panel
can lead to a danger of objects flying about
during braking and evasive maneuvers. There is
a risk of injury and risk of damage to property.