BMW X2 2021 Owner's Manual page 116

CONTROLS
2. Move the selector lever into the desired posi‐
tion.
Engaging selector lever
positions: with a tap-operated
selector lever
General information
To prevent the vehicle from creeping after you
select a gear position, maintain pressure on the
brake pedal until you are ready to start.
Functional requirements
Only when the brake pedal is depressed is it
possible to change from selector lever position P
to another selector lever position.
Depending on the transmission version, the en‐
gine may have to be running too.
The selection lever position P cannot be
changed until all technical requirements are met.
Engaging selector lever position D,
N, R
A selector lever lock prevents the following faulty
operation:
▷ Unintentional shifting into selector lever posi‐
tion R.
▷ Unintentional shifting from selector lever po‐
sition P into another selector lever position.
1. Fasten driver's safety belt.
116
Driving
Online Edition for Part no. 01405A2CF16 - II/21
2. Press and hold the button to release the se‐
lector lever lock.
3. Push the selector lever in the desired direc‐
tion, past a resistance point, if needed. The
selector lever automatically returns to the
center position when released.
Engaging selector lever position P
Press button P.
Rolling or pushing the vehicle
General information
In some situations, the vehicle is to roll without
its own power for a short distance, for instance in
a car wash, or be pushed.