BMW X2 2021 Owner's Manual page 133

operating temperature has been attained, the in‐
dicator is in the center position.
General information
If the engine oil or coolant, and thus the engine,
become too hot, a Check Control message is
displayed too.
To check the coolant level, refer to page 260.
Display
Distance to destination
Depending on the vehicle equipment, the dis‐
tance remaining to the destination is displayed if
a destination is entered in the navigation system
before the trip is started.
The distance to the destination is adopted auto‐
matically.
Time of arrival
Depending on the vehicle equip‐
ment, the estimated time of arrival
is displayed if a destination is en‐
tered in the navigation system be‐
fore the trip is started.
The time must be correctly set.
Trip computer on the Control
Display
Concept
The trip computer displays different vehicle data
on the Control Display, such as average values.
Online Edition for Part no. 01405A2CF16 - II/21
Displays
General information
Two types of trip computers are available on the
Control Display:
▷ "Onboard info": average values, such as the
consumption, are displayed. The values can
be reset individually.
▷ "Trip computer": the values deliver an over‐
view of a specific route and can be reset as
often as necessary.
Calling up the trip computer or
travel computer
Via iDrive:
1. "My Vehicle"
2. "Driving information"
3. "Onboard info" or "Trip computer"
Resetting the trip computer
Via iDrive:
1. "My Vehicle"
2. "Driving information"
3. "Onboard info"
4. "Consumption" or "Speed"
5. "OK"
Resetting the trip computer
Via iDrive:
1. "My Vehicle"
2. "Driving information"
3. "Trip computer"
4. Move the Controller to the left, if needed.
▷ "Reset": all values are reset.
▷ "Automatic reset": all values are reset
approx. 4 hours after the vehicle has
come to a standstill.
5. If necessary, "OK"
CONTROLS
133