Electrical Safety - GLP Fusion XPAR 12Z Quick Start And Safety Manual

www.glp.de
The Fusion XPAR 12Z is intended for use by experienced professionals with the knowledge
and skills to set up, operate, and maintain high-powered, remotely controlled lighting
equipment safely and efficiently. These operations require expertise that may not be
provided in this Manual or in the User Manual.
● Respect all warnings and directions given in the fixture's user documentation and on the
fixture. Read the user documentation and familiarize yourself with the safety precautions
it contains before installing or using the fixture. GLP and affiliated companies will take no
responsibility for damage or injury resulting from disregard for the information in the user
documentation.
● Check the GLP website at www.glp.de and make sure that you have the latest version
of this manual. Check the fixture software version indicated on page 2 of this manual
and then use the fixture's control panel to check the version installed in the fixture. If the
versions are not the same, this manual may still cover the fixture, because software
updates do not always affect the way you use the fixture. However, it is possible that this
manual does not match the fixture perfectly. Software release notes can help clarify this
question. You can consult software release notes and download the correct version of
this manual on the GLP website if necessary.
● Make all user documentation available to all installers and operators. Save this
document for future reference.
● If you have any questions about the safe operation of the fixture, please contact an
authorized GLP distributor (see list of distributors at www.glp.de).
● Use the fixture only as directed in this manual. Observe all markings in this manual and on
the fixture.
● Refer all repairs and any service operation not described in this manual to a technician
authorized by GLP.
● The light source in this fixture must not be changed by the end user.
● Read and follow the user documentation for all additional equipment.

Electrical safety

● Do not allow the fixture to become immersed. Do not expose the fixture to high-pressure
water projections.
● Keep any unused connectors on the fixture sealed with their protective caps at all times,
both when the fixture is in use and when not in use.
● Use only a source of AC mains power that complies with local building and electrical
codes and has both overload and ground fault (earth fault) protection.
● Ensure that the fixture is electrically connected to ground (earth).
● Disconnect the fixture from AC mains power before carrying out any installation or
maintenance work and when the fixture is not in use.
● Disconnect the fixture from power immediately if any seal, cover, cable, connector or
other component is damaged, defective, deformed or showing signs of overheating. Do
6
Safety
Fusion XPAR 12Z Quick Start and Safety Manual Rev. A