Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for GLP Fusion XPAR 12Z
Summary of Contents for GLP Fusion XPAR 12Z
- Page 1 Fusion XPAR 12Z Software version 1.0.0.0...
- Page 2 This document covers fixture software version 1.0.0.0 © 2018-2022 German Light Products GmbH. All rights reserved. The marks ‘GLP’ and ‘German Light Products’ are trademarks registered as the property of German Light Products GmbH in Germany, in the United States of America and in other countries.
-
Page 3: Table Of Contents
Avoiding damage from light sources and heat ......10 IP rating....................10 Avoiding damage from water and humidity........10 Avoiding damage from dust and airborne particles......11 Transportation and storage..............11 GLP Service and Support..............11 XPAR 12Z overview..................12 Installation ....................14 Permitted mounting options ...............14 Securing fixtures with a safety cable ..........14 Installing on a surface at any angle ..........15... - Page 4 Thermal ....................26 Included items..................27 Accessories (optional)................27 Dimensions and weight................27 10. Dimensions ....................28...
-
Page 5: Safety
Read this manual carefully before installing, using or servicing the Fusion XPAR 12Z lighting fixture. If you have any doubts or questions about how to use the fixture safely, contact your GLP® supplier for assistance. Your GLP supplier will be happy to help. -
Page 6: Electrical Safety
● Check the GLP website at www.glp.de and make sure that you have the latest version of this manual. Check the fixture software version indicated on page 2 of this manual and then use the fixture’s control panel to check the version installed in the fixture. -
Page 7: Fire Safety And Protection From Burns
- US power cable: 16 A, 14 AWG, UL-listed, E304117, SJT, 4.9 ft. - EU power cable: 16 A, 1.5 mm², H07RN-F, 1.5 m. Do not connect more than twelve (12) Fusion XPAR 12Z fixtures to power in a chain at 100- 120 V, 60 Hz. -
Page 8: Eye Safety
● Do not place any optical components other than Fusion XPAR 12Z accessories from GLP onto the front of the fixture. ● Do not stick filters, masks or other materials onto the fixture. Do not block the light output in any way. -
Page 9: Installation Safety And Protection From Personal Injury
Do not attempt to use a fixture that is obviously damaged. ● Do not modify the fixture in any way not described in its user documentation. ● Install genuine GLP parts only. Fusion XPAR 12Z Quick Start and Safety Manual Rev. A... -
Page 10: Avoiding Damage To The Fixture
(an IP65 rating means that the item is protected against the entry of water from rain, projections and low-pressure jets as well as the entry of dust). When assembling connectors and installing them on cable, follow the manufacturer’s and ensure that an Fusion XPAR 12Z Quick Start and Safety Manual Rev. A... -
Page 11: Avoiding Damage From Dust And Airborne Particles
● Store the fixture in a dry location when not in use. GLP Service and Support Contact information for the nearest GLP Service and Support is available online at www.glp.de/en/service, by email at info@glp.de, or by telephone at the following numbers: ●... -
Page 12: Xpar 12Z Overview
XPAR 12Z overview 3. XPAR 12Z overview The Fusion XPAR 12Z from GLP is a powerful LED-based lighting fixture which uses a 120W RGBL (red, green, blue and lime) LED emitter. A motorized Fresnel lens provides variable zoom giving a beam angle from 6° – 44°. - Page 13 This Quick Start and Installation Manual gives a very basic overview of installation options and control functions. See the XPAR 12Z User Manual available for download from www.glp.de for full details of control, DMX tables, etc. Fusion XPAR 12Z Quick Start and Safety Manual Rev. A...
-
Page 14: Installation
The safety cable must be approved for the weight that it secures. Fusion XPAR 12Z Quick Start and Safety Manual Rev. A... -
Page 15: Installing On A Surface At Any Angle
5. In a temporary installation, secure the fixture with a safety cable as described in ‘Securing fixtures with a safety cable’ on page 14 if there is any risk that the fixture will cause injury or damage if it falls. Fusion XPAR 12Z Quick Start and Safety Manual Rev. A... -
Page 16: Installing On A Rigging Truss Or Similar Structure
1. Attach a suitable clamp to the mounting bracket of the XPAR 12Z as shown in Figure 4. 2. Attach the clamp to the truss or structure. 3. Secure the fixture with a safety cable as described in ‘Securing fixtures with a safety cable’ on page 14. Fusion XPAR 12Z Quick Start and Safety Manual Rev. A... -
Page 17: Free Standing On A Flat Surface Using Mounting Bracket
5. Ensure the fixture is located in a position where it will not form a trip hazard or cause injury if it falls over. If in doubt secure the fixture with a safety cable to an adjacent fixed point. Fusion XPAR 12Z Quick Start and Safety Manual Rev. A... -
Page 18: Free Standing As Uplighter
3. Ensure the fixture is located in a position where it will not form a trip hazard or cause injury if it falls over. If in doubt secure the fixture with a safety cable to an adjacent fixed point. Fusion XPAR 12Z Quick Start and Safety Manual Rev. A... -
Page 19: Ac Mains Power
/ power plug on the supplied power cord / input cable. If you do this, check that the cord cap / plug is rated minimum 250 V, 16 A, Fusion XPAR 12Z Quick Start and Safety Manual Rev. A... -
Page 20: Connecting Multiple Fixtures To Power In A Chain
(12) fixtures in total. If you are using 200-240 V, 50 Hz AC mains power you can continue connecting fixtures Mains OUT to Mains IN until the chain contains a maximum of twenty-four (24) fixtures total. Fusion XPAR 12Z Quick Start and Safety Manual Rev. A... -
Page 21: Connecting To Dmx Data
Data + Not used Not used If you would like advice with planning and installing a DMX link, your GLP supplier will be happy to provide assistance. Installing optional barndoors An optional barndoor accessory is available for the XPAR 12Z that can be installed on the front of the fixture to control lateral light spill if required. -
Page 22: Installing Color Filter Frame
This would normally be used to hold diffusion or frost media to soften the light beam. The procedure to install the frame is the same as for the barndoor accessory above. Fusion XPAR 12Z Quick Start and Safety Manual Rev. A... -
Page 23: Starting And Stopping Operation
To start operation, check that nobody is looking into the front of the fixture, then apply power to the AC mains power circuit. To stop operation, shut down power to the AC mains power circuit. Fusion XPAR 12Z Quick Start and Safety Manual Rev. A... -
Page 24: Dmx Control Modes Overview
The CTC and M/G shift channels modify Blue fine the color selected by the other Lime channels. Lime fine Color wheel A Control / Settings channel lets you configure the fixture remotely via DMX. M/G shift Fusion XPAR 12Z Quick Start and Safety Manual Rev. A... - Page 25 DMX Mode 6: Easy provides a simple operating mode with a fixed selection Dimmer of colors and zoom. Zoom Control A Control / Settings channel lets you Color Wheel configure the fixture remotely via DMX. Fusion XPAR 12Z Quick Start and Safety Manual Rev. A...
-
Page 26: Technical Specifications
Control data in and thru (out): 5-pin XLR with sealing caps Construction Ingress protection rating: IP65 Fixture housing: Extruded aluminum Color: Black Thermal Cooling: Convection Minimum ambient temperature: -10° C (14° F) Maximum ambient temperature: 40° C (104° F) Fusion XPAR 12Z Quick Start and Safety Manual Rev. A... -
Page 27: Included Items
Barn Door attachment Dimensions and weight Length: 245mm / 9.6 ins. Width: 245 mm / 9.6 ins. Height: 341 mm / 13.4 ins. (including bracket) Weight: 7 kg (15.4 lbs.) Fusion XPAR 12Z Quick Start and Safety Manual Rev. A... -
Page 28: Dimensions
Dimensions 10. Dimensions All dimensions are in millimeters Fusion XPAR 12Z Quick Start and Safety Manual Rev. A... - Page 29 Fusion XPAR 12Z Quick Start and Safety Manual Rev. A...