www.glp.de
9. Technical specifications
Optics
Light source: 1x 120W RGBL LED
Lens: 190mm Fresnel
Lifetime: 20 000 hrs. approx. to > 70% luminous output
Output: 2520lm / 101000cd
Intensity: 3600lx @ 5m (6° zoom, Full ON)
CRI (Ra): 85+
TLCI: 84 @ 6000K
Beam angle (half peak): Motorized 6° - 44°
Control
Control systems: DMX, RDM, Manual setting, Master/Slave
DMX channel footprint: 4 / 6 / 8 / 11 / 16 depending on mode
Setting and addressing: Onboard control panel with OLED display, RDM
DMX compliance: USITT DMX512
RDM compliance: ANSI/ESTA E1.20
Installation
Options: Fixed to surface at any angle, suspended using truss mount bracket, floor standing
using split yoke bracket
Operating position: Any
Minimum distance to combustible materials: 0.2 m (8 in.)
Minimum distance to illuminated surfaces: 0.2 m (8 in.)
Installation environment: Temporary or permanent indoor installation, temporary outdoor
installation
Secondary attachment: eyelet for safety cable attachment
Electrical
AC mains power: 100-240 V nominal, 50/60 Hz
Power supply unit: Auto-ranging electronic switch mode
Maximum power consumption, all LEDs at 100% output: 135 W
Maximum permitted number of fixtures daisy-chained to power
12 x XPAR 12Z total @ 100-120 V, 60 Hz
24 x XPAR 12Z total @ 200-240 V, 50 Hz
Connections
AC mains power in and thru (out): TRUE1 compatible with sealing caps
Control data in and thru (out): 5-pin XLR with sealing caps
Construction
Ingress protection rating: IP65
Fixture housing: Extruded aluminum
Color: Black
Thermal
Cooling: Convection
Minimum ambient temperature: -10° C (14° F)
Maximum ambient temperature: 40° C (104° F)
26
Technical specifications
Fusion XPAR 12Z Quick Start and Safety Manual Rev. A