Electrical Safety - GLP Fusion Stick FS16Z User Manual

www.glp.de
equipment safely and efficiently. These operations require expertise that may not be
provided in this manual.
● Respect all warnings and directions given in the fixture's user documentation and
on the fixture. Read the fixture's Quick Start and Safety Manual and familiarize
yourself with the safety precautions it contains before installing, using or servicing the
fixture. GLP and affiliated companies will take no responsibility for damage or injury
resulting from disregard for the information in the user documentation.
● Check the GLP website at www.glp.de and make sure that you have the latest
versions of the fixture's Quick Start and Safety Manual and this user manual.
● Check the fixture software version indicated on page 2 of this user manual and then
use the fixture's control panel to check the version installed in the fixture. If the
versions are not the same, the user manual may still cover the fixture, because
software updates do not always affect the use of the fixture. However, it is possible
that this manual does not match the fixture perfectly. Software release notes can
help clarify this question. You can consult software release notes and download the
correct version of this user manual on the GLP website if necessary.
● Make both the Quick Start and Safety Manual and this user manual available to all
persons who will install, operate or service the fixture. Save both documents for
future reference.
● If you have any questions about the safe operation of the fixture, please contact an
authorized GLP distributor (see list of distributors at www.glp.de).

Electrical safety

● Do not allow the fixture to become immersed. Do not expose the fixture to high-
pressure water projections.
● Keep any unused connectors on the fixture sealed with their protective caps at all
times, both when the fixture is in use and when not in use.
● Use only a source of AC mains power that complies with local building and
electrical codes and has both overload and ground fault (earth fault) protection.
● Ensure that the fixture is electrically connected to ground (earth).
● Disconnect the fixture from AC mains power before carrying out any installation or
maintenance work and when the fixture is not in use.
● Disconnect the fixture from power immediately if any seal, cover, cable, connector
or other component is damaged, defective, deformed or showing signs of
overheating. Do not reapply power until the fixture has been repaired and made
safe by a technician authorized by GLP.
● Check that all power distribution equipment, cables and connectors are in perfect
condition, rated for the electrical requirements of all connected devices, suitable
for their application and suitable for the installation environment.
6
Safety
Fusion Stick FS16Z
User Manual Rev. A