Starting And Stopping Operation - GLP Fusion XPAR 12Z Quick Start And Safety Manual

German Light Products® Starting and stopping operation

7. Starting and stopping operation

Warning! Before you apply power to the fixture or operate it after a blackout,
make sure that nobody is looking directly into the front of the fixture.
The XPAR 12Z's TRUE1-compatible mains power input connector supports hot-plugging, and
connecting and disconnecting a live power cable is an option, especially if you need to
shut down power urgently, but it is still good practice to shut down power to the AC mains
power circuit before connecting and disconnecting power cables.
To start operation, check that nobody is looking into the front of the fixture, then apply
power to the AC mains power circuit.
To stop operation, shut down power to the AC mains power circuit.
Fusion XPAR 12Z Quick Start and Safety Manual Rev. A 23