Eye Safety; Strobe Safety - GLP Fusion XPAR 12Z Quick Start And Safety Manual

www.glp.de
● Do not illuminate surfaces within 0.2 m / 8 in. of the fixture. The light output from the
fixture is powerful enough to cause burns or fire in illuminated objects at very close
range.
● Do not place any optical components other than Fusion XPAR 12Z accessories from GLP
onto the front of the fixture.
● Do not stick filters, masks or other materials onto the fixture. Do not block the light output
in any way. The front surface becomes hot during operation and can melt or ignite
objects that are in contact with the surface. Ensure that the front surface Is clean and
unobstructed at all times in order to prevent a fire hazard and damage to the fixture.

Eye safety

● The XPAR 12Z is classified as a Risk Group 2 lighting fixture according to EN 62471. Possibly
hazardous optical radiation emitted. Do not stare into the light output from the fixture.
May be harmful to the eyes.
● Do not look at the fixture's light output with optical instruments or any device that may
concentrate the light output.
● Make sure that persons near to or working on the fixture are not looking directly into the
light output when the fixture lights up suddenly. This can happen when power is applied,
when the fixture receives a DMX signal, or when certain control menu items are
selected.
● The warning below is printed on the fixture. If the warning becomes impossible to read,
replace it with a label reproduced from this illustration:
● Provide well-lit conditions to reduce the pupil diameter of anyone working on or near the
fixture.

Strobe safety

● Flashing light, particularly at 5 - 30 Hz, may cause seizures in persons with photosensitive
epilepsy. Do not use strobe effects for extended periods.
8
Safety
Risk Group 2
CAUTION: Possibly hazardous
optical radiation emitted from this
product. Do not stare at operating
lamp. May be harmful to the eye.
Fusion XPAR 12Z Quick Start and Safety Manual Rev. A