Starting And Stopping Operation - GLP Fusion EXO Wash 30 User Manual

German Light Products®

7. Starting and stopping operation

Warning! Before you apply power to the fixture or operate it after a
blackout, make sure that nobody is looking directly into the front of the
fixture.
The EXO Wash 30's TRUE1 mains power input connector supports hot-plugging, and
connecting and disconnecting a live power cable is an option, especially if you need
to shut down power urgently, but it is still good practice to shut down power to the AC
mains power circuit before connecting and disconnecting power cables.
To start operation, check that nobody is looking into the front of the fixture, then apply
power to the AC mains power circuit.
To stop operation, shut down power to the AC mains power circuit.
EXO Wash 30 User Manual Rev. B
Starting and stopping operation
21