Table of Contents
Advertisement
Instant Restart
When Instant Restart is On, users can restart projector immediately within 90
secs after turning off projector.
Operation
When Instant Restart is Off, users need to wait Light to cool down to restart
Settings
the projector.
When
Security
See
Settings
Selects a baud rate that is identical with your computer's so that you can connect
Baud Rate
the projector using a suitable RS-232 cable and update or download the projector's
firmware. This function is intended for qualified service personnel.
Adjusts the equalizer gain settings for an HDMI signal. The higher the setting, the
HDMI
stronger the gain value. If there are more than one HDMI port on the projector,
Equalizer
select the HDMI port first before adjusting the value.
Returns all of the adjustments you've made for the Settings menu to the factory
Reset Settings
preset values.
System
Language
Sets the language for the On-Screen Display (OSD) menus.
• Standby Mode
• Auto Disable Network Standby Mode: Allows the projector to disable the
Standby
Settings
• Audio Pass Through: The projector can play sound when it is in standby mode
• Background
Background
• Splash
Settings
• Menu Type: Switches to the Basic OSD menu.
Menu Settings
• Menu Display Time: Sets the length of time the OSD will remain active after
Instant Restart
Utilizing the password function on page
• Eco: The projector maintains at normal standby mode with less than 0.5W
power consumption.
• Normal: Allows the projector to provide audio pass through function in
standby mode.
network function after a set period of time after it enters standby mode. For
instance, if 20 min is selected, the projector is able to provide the network
function for 20 minutes after it enters standby mode. When 20 minutes is up, the
projector enters normal standby mode.
and the corresponding jacks are correctly connected to devices. Press
choose the source that you wish to use. See
make the connection.
Settings:
Screen:
Allows you to select which logo screen will be displayed during
projector start-up.
your last key press.
On
is
, Quick Cooling will be grayed out.
Sets the background color for the projector.
41.
Connection on page 18
Operation (under non-Launcher source)
/
to
for how to
51
Advertisement
Table of Contents
