BenQ EH620 User Manual page 47

Returns all of the adjustments you've made for the Picture menu to the factory
Reset Picture
preset values.
Display
There are several options to set the image's aspect ratio depending on your input
signal source.
• Auto: Scales an image proportionally to fit the
• Real: Projects an image as its original resolution and
Aspect Ratio
• 4:3: Scales an image so that it is displayed in the
• 16:9: Scales an image so that it is displayed in the
• 16:10: Scales an image so that it is displayed in the
Keystone See
Auto Vertical Automatically corrects the keystoning at the vertical side of the projected image.
Keystone
Adjusts the image size and focus and check that the
projected image is free from distortion.
Test Pattern
•
PC &
Component
YPbPr Tuning
• H. Size: Adjusts the horizontal width of the image.
Displays the position adjustment page. To move the projected image, use the
Position directional arrow keys. This function is only available when a PC signal (analog RGB)
is selected.
projector's native resolution in its horizontal or
vertical width.
resizes it to fit within the display area. For input
signals with lower resolutions, the projected image
will be displayed in its original size.
center of the screen with a 4:3 aspect ratio.
center of the screen with a 16:9 aspect ratio.
center of the screen with a 16:10 aspect ratio.
Correcting keystone on page
Phase: Adjusts the clock phase to reduce image
distortion. This function is only available when a PC
signal (analog RGB) or YPbPr signal is selected.
This function is only available when a PC signal (analog RGB) is selected.
17.
Operation (under non-Launcher source)
15:9 picture
4:3 picture
16:9 picture
4:3 picture
16:9 picture
16:10 picture
47